Subscribe to our Newsletter for exclusive offers!

Benchmade 710 McHenry & Williams 3.90" Satin D2 Plain Blade, G10 Handles - 710D2

Customer Reviews 4.873 Read 55 reviewsWrite a Review
Part Number: BM710D2
Manufacturer: Benchmade Knives
Retail Price: $180.00
Our Price:
$153.00
You Save: $27.00 (15%)
Calculate Shipping
KnifeCenter.com: Authorized Benchmade Dealer

BM710D2: 710 - (McHenry & Williams)
Benchmade

Model 710 was designed by custom knife makers Bill McHenry and Jason Williams and premiers Benchmade's patented AXIS™ lock which was also designed by Bill and Jason. It looks simple enough, and it is, but it's the end result of a lot of hard work and perseverance by Bill and Jason, over the course of 4 years. The AXIS™ lock is totally ambidextrous and allows for easy one-handed opening and closing of the blade without your fingers ever being in the path of the blade. The design is very intuitive to operate with little or no instruction needed on how the lock functions.

As simple as the lock is, perhaps its biggest selling feature is its brute strength. In testing, the lock supported a negative load of over 200 pounds without damage. When the lock does finally fail, the liners simply crack over the locking pin, but at no time in Benchmade's testing would the blade have closed on the users hand. The AXIS™ lock features two "Omega" shaped springs that provide outstanding functional redundancy. The springs are lightly stressed and our tests show they should last indefinitely. In the unlikely event that one of the springs does fail, the other will still operate the knife just fine.

Is this the strongest lock made? That's very difficult to say for certain. Benchmade claims that i's certainly more rugged than many of the typical lock-back and liner-locking knives. The sizable 3.90" D2 Tool Steel blade of the 710 features a reverse-curve grind for increased cutting ability. The double liners are heat-treated 420 stainless steel as is the locking-bar. There is a removable, stainless steel pocket-clip located on the butt end of the knife. This given clip location on the butt end is necessary due to the locking mechanism. If the clip were positioned on the pivot end, the knife would protrude much too far out of your pocket.

Features
  • Reverse Curve Blade Shape
  • Larger Sized Folder
  • D2 Tool Steel Blade
  • Machined G10 Handle Scales
  • Country of Origin: USA
Specifications
  • Blade Length: 3.90"
  • Blade Thickness: 0.115"
  • Blade Material: D2 Tool Steel
  • Blade Hardness: 59-61HRC
  • Blade Style: Modified Clip-Point; Ambidextrous Dual Thumb Studs
  • Weight: 4.50oz.
  • Clip: Black, Reversible, Tip-Up
  • Lock Mechanism: AXIS
  • Overall Length: 8.80"
  • Closed Length: 4.90"
AXIS® A patented Benchmade exclusive, AXIS has been turning heads and winning fans ever since its introduction. A 100-percent ambidextrous design, AXIS gets its function from a small, hardened steel bar which rides forward and back in a slot machined into both steel liners. The bar extends to both sides of the knife, spanning the liners and positioned over the rear of the blade. It engages a ramped, tang portion of the knife blade when it is opened. Two omega style springs, one on each liner, give the locking bar it’s inertia to engage the knife tang, and as a result the tang is wedged solidly between a sizable stop pin and the AXIS bar itself.
Made in USA
Made in USA
This product is USA born and raised.
Pocket Clip
Pocket Clip
Includes a pocket clip for easy accessibility and a more secure carry.
D2 Tool Steel
D2 Tool Steel
This is a high carbon steel that is appropriate for use in hostile environments and is known for edge retention.
G10 Handles
G10 Handles
Formed in a sheet under high pressure by combining fiberglass and an epoxy resin binder. These handles are lightweight and shaped to ensure a solid grip.
4.873 (55 reviews)
4.9 out of 5 stars
5 star
49
4 star
5
3 star
1
2 star
0
1 star
0
3 out of 5
Kevin
Maryland
Mar 20, 2015
Pros: Blade Material, Blade Sharpness
Cons: None
Only So-So
Not sure how I feel about this knife yet. Blade is great but the axis lock is not like the rest of my benchmades. It hasn't smoothed out and it also has the habit upon closing to bounce out when closed quickly. Thinking I may have gotten a defect and am going to send back to benchmade. As of right now I'm regretting not buying the 943. Size and pocket feel are great thougg.
5 out of 5
Bubba
FT Bragg NC
Mar 19, 2015
Pros: Handle Material, Pocket Clip, Lock Ease of Use, Handle Feel, Blade Material, Ease of Opening, Overall Quality
Cons: None
Great for all around utility work. skinning and fleshing hides to opening boxes
5 out of 5
William
Virginia Beach, Va
Jan 15, 2015
Pros: Blade Sharpness, Lock Type, Handle Material, Overall Quality, Pocket Clip, Ease of Opening, Handle Feel, Weight, Lock Ease of Use, Blade Material
Cons: None
One of my favorite Knives
First off I don't understand how anybody couldn't give this knife any less than 5 stars. This is a fantastic knife and I as anybody who has ever owned one can attest to why Benchmade has made this thing for so long. The steel is amazing as is the G10 handles and the axis lock. The only downside which also makes this knife awesome is the recurve of the blade. I don't have trouble sharpening it because of the sharpmaker but if I was inexperienced I could see how this could cause a problem.
Read all 55 Reviews »
Loading Reviews

© 1995-2015 by Howard Korn and KnifeCenter Inc. All rights reserved.

5201 Lad Land Dr, Fredericksburg, VA 22407 - 800.338.6799 (Phone Orders Welcome)