DPx Gear HEST II Woodsman Fixed 3.15" Plain Stonewashed Sleipner Blade, Hardwood Handles
RPDPHSX004: DPx HEST II Woodsman
The craftsmen at LionSTEEL in Maniago, Northern Italy, manufacture the DPx H•E•S•T™ II Woodsman fixed blade knife. This knife is the Italian-made answer to the original DPx H•E•S•T and features various enhancements to the original configuration, including Sleipner steel, a revised pry bar angle and a slightly modified hollow handle. Sleipner steel is a chromium-molybdenum-vanadium alloyed tool steel that boasts extreme wear resistance, resistance to chipping, edge retention, hardness (60 HRC) and excellent "toothiness" in fine cutting. The blade of your knife has been either stone washed Woodsman or Titanium Carbo-Nitride (TiCN) PVD coated Assault.
The DPx Gear Hostile Environment Survival Tool (HEST) II is a short run, high endversion of the DPX HEST Original. The HEST II is made with Sleipnersteel which delivers a harder, more granular cutting edge without the chipping or problems normally associated with very hard tool steels. The HEST II comes in a black G10 scaled, PVD coated tactical version for law enforcement and military or an "old school" naked stone washed blade and natural matching Brazilian Santos wood scales. The scales on the HEST II are thick providing more storage area and a meatier grip. We created a beautiful matching sheath in either cordura tactical or hand made leather.
Because we see this a "ranch carry" or military product we changed the pry bar to accommodate gloves by softening the angle. We also eliminated one hole to make the prybar stronger. There is also a handy hex driver.
Designed by adventurer Robert Young Pelton and handmade by LionSTEEL in Northern Italy, the HEST II is an upgraded version of the knife that changed the way adventurers think about brutal-use knives.
The 3.15" (80mm) blade of the HEST II is made of Sleipner tool steel with a 60 Rockwell hardness. The HEST Original had a Rockwell hardness of 57-58. Sleipner steel is a chromium-vanadium-molybdenum alloy (7% Cr, 0.5% V, 2.5% Mo) much like D2 steel and characterized by its edge retention, ease of sharpening, and resistance to wear and chipping. The Sleipner steel also has excellent "tooth" for repetitive, fine cutting.
Because the knife is tool steel, and not stainless steel, it is easier to sharpen but may oxidize if not properly cared for. Rust only affects the appearance of the knife and not the performance. Like all DPx Gear knives, we ask that you use a whetstone or diamond sharpener to dress the edge, and NEVER use a motorized grinder.
The blade is 0.187" (4.8mm) thick and features three sizes of wire strippers and a pry notch. There's a hex driver at the hilt and a wire breaker at the base of the blade. We removed a lashing point in the pommel because we found it unnecessary, and we changed the pry bar angle to better fit the size of the knife.
The HEST II has a hollow handle designed for storing survival materials like fire starter or water-purification tablets. The scales are attached with two slotted/Allen screws.
The HEST II is available in two versions: Woodsman and Assault.
The Woodsman is a perfect size and balance for use as a skinning knife and camp tool. The handle is scaled in natural, mirror matched, Brazilian Santos hardwood and the blade is stonewashed to a soft glow. The Woodsman weighs 5.2oz and comes with an Italian leather, hand sewn.oil-tanned sheath.
The Assault is a take-to-the-fight, low-profile duty knife. The handle is American G10 scales and features a PVD black-coated blade that reduces the visible signature to nearly zero. The Assault weighs 5.4 oz and comes with a black Cordura sheath with a sleeve for a sharpening rod or fire starter.
DPx Gear knives are guaranteed against manufacturer defects for the life of the purchaser. DPx Gear reserves the right to repair or replace a knife under warranty at DPx Gear's discretion.
- Blade is Sleipner tool steel with 60 Rockwell hardness
- Brazilian Santos hardwood scales
- Handmade Italian leather sheath
- Unique wire stripper, jimping and hard lashing points
- Integrated striker pommel, pry bar and lanyard hole
- Thumb grip/bottle opener
- 304 stainless steel hybrid slotted/Allen screws
- 1/4" Hex driver
- Blade Length: 3.15" (80 mm)
- Blade Thickness: 0.187" (4.8mm)
- Blade Steel: Sleipner Tool Steel 60HRC
- Overall Length: 7.63" (194 mm)
- Weight: 5.2 oz
- Handle Material: Hollow Brazilian Santos hardwood
- Sheath Material: Handmade Italian leather
- Designed by Robert Young Pelton
- Hand-made by Lion Steel in Maniago, Northern Italy
UPC Code: 857171003046
Leather is known for its durability and traditional appeal. When compared to kydex it is preferred for its silence when bumped against other objects, as well as blade retention.
Provides a traditional, natural look and feel to a modern tool. Wood absorbs shock well and is popular in axe handles.
Cold Steel Bushman 7" Fixed Blade w…
Ontario Randall RTAK II Fixed 10-1/…
Ontario RAT-3 Utility Knife 3-3/4" …
Cold Steel Survival Edge 5" German …
Ontario RAT-7 Survival Knife 7" Pla…
Gil Hibben Alaskan Survival Knife 6…
The Original Dog Tag 4 in 1 Surviva…
DPx Gear HEST Original by OKC Fixed…
Ontario RAT-3 Utility Knife 3-3/4" …
Ontario RAT-5 Survival Knife 5-1/4"…
Fallkniven A1 Swedish Survival Knif…