DPx Gear HEFT 6 Assault Fixed 6" Black Combo Blade, Black G10 Handles, Cordura Sheath - DPHFX009
RPDPHFX004: DPx H.E.F.T. 6" Serrated Assault
The knife for the big tasks. When your life depends on the tools you choose.
DPx Gear HEFT 6"
The new DPx Gear Hostile Environment Field Tool (HEFT) is designed and built for big-knife work. Whether that means skinning a moose, building a shelter, or carrying it on your next overseas adventure, the full-tang HEFT 6" is a tried-and-tested workhorse. The knife was designed by Robert Young Pelton and Tommaso Rumiciand handmade by LionSTEEL in Northern Italy.
The 5.75" (145mm) blade is made of Sleipner tool steel with a 60 Rockwell hardness. Sleipner steel is a chromium-vanadium-molybdenum alloy (7% Cr, 0.5% V, 2.5% Mo) much like D2 steel and characterized by its edge retention, ease of sharpening, and resistance to wear and chipping. The Sleipner steel also has excellent "tooth" for repetitive, fine cutting.
Because the knife is tool steel, and not stainless steel, it is easier to sharpen but may rust if not properly cared for. Rust only affects the appearance of the knife and not the performance. Like all DPx Gear knives, we ask that you use a whetstone or diamond sharpener to dress the edge, and NEVER use a motorized grinder.
The back of the blade is 0.2" (5mm) thick and features three sizes of wire strippers that serve as jimping. There's a lanyard hole and lashing points, and an integrated striker and pry bar on the pommel.
The HEFT 6" is expertly balanced for hours of hard use without causing blisters, hot spots, or bruising. The handle is hollow and designed to store anything from survival materials like fire starter and water-purification tablets. The scales are secured with two hybrid slotted/Allen screws.
The Assault is a low-profile, super-durable combatives tool. Its PVD black-coated blade has a very low visual signature, making it an excellent choice for law enforcement and military use. The contoured handles are black American G10 scales. The knife weighs 10.23 oz. and comes with a black Cordura sheath.
DPx Gear knives are guaranteed against manufacturer defects for the life of the purchaser. DPx Gear reserves the right to repair or replace a knife under warranty at DPx Gear's discretion.
- Co-designed by Robert Young Pelton and Tommaso Rumici
- Integrated striker pommel, pry bar, lanyard hole and lashing point
- 1/4" magnetized hex driver
- Wire stripper jimping
- Overall Length: 11.22"
- Blade Length: 6.00"
- Blade Thickness: 0.19"
- Weight: 10.23 ounces
- Manufacturer: LionSTEEL
- Blade Steel: Sleipner tool steel with 60 Rockwell hardness
- Coating/Finish: Black Titanium Carbo-Nitride (TiCN) Physical Vapor Deposition (PVD)
- Handle: American black G10 hollow handles with storage featuring 304 stainless steel hybrid slotted/Allen screws
- Sheath: Cordura sheath with utility pocket
- Made in Italy
UPC Code: 857171003107
Formed in a sheet under high pressure by combining fiberglass and an epoxy resin binder. These handles are lightweight and shaped to ensure a solid grip.
Gerber 31-000751 Bear Grylls Surviv…
Ontario SP10 Spec Plus Marine Raide…
KA-BAR 1217 Full Size USMC Fighting…
Cold Steel 80PGTK GI Tanto Fixed 7"…
Columbia River 2010N Crawford Kaspe…
$89.99On Sale: $25.95
Cold Steel 13RTK Recon Tanto Fixed …
$124.99On Sale: $69.95
Ontario 499 Air Force Survival Knif…
Columbia River 2910 Hisshou 13" YK-…
Ontario OKC3S Khaki Brown USMC Bayo…
United Cutlery Honshu Karambit 4" B…
Cold Steel Double Agent II Clip Poi…