Spyderco UK Penknife 3" S30V Drop Point Blade, Foliage Green G10 Handles
Spyderco C133P Bug Micro-Size Foldi…
SOG Micron Tanto Keychain Knife 1.5…
Spyderco C75P3 Kiwi3 Pocket Knife 2…
Spyderco C137P HoneyBee Micro-Size …
Spyderco C138P GrassHopper Miniatur…
Svord PKM Peasant Mini Folding Knif…
AITOR Castor Folding 3-1/8" Leaf Sh…
Buck Companion 3" Closed Executive …
Douk-Douk Folder 3-1/8" Etched Carb…
Buck Lancer 2-5/8" Closed 2 Blade F…
KA-BAR 4084 Big Easy Slipjoint Fold…
SP94GPFG3: UK Pen Knife - Drop Point
The knife may be man’s oldest tool but today it is governed by different carry restrictions in nearly every country in the world. It seems: “if man makes it, he must legislate it”. This is particularly true regarding pocket knives in the United Kingdom where legal guidelines govern the size and function of all pocketknives carried in public. One of these parameters is that folding knives not have blades that lock open. Spyderco addressed this by developing a non-locking folder expressly for the UK called the UK Penknife.
The blade on the UK Penknife is held open by a notched-joint at the knife’s pivot. When closing the blade the notch produces roughly twenty-pounds of resistance, functionally similar to traditional slip-joint penknives. To achieve a heightened sense of control and comfort, Spyderco designers added a deep finger choil positioning the index finger on the bottom of the blade directly under the thumb. This lets you choke up nearer the cutting edge with comfort and dexterity. The handle is foliage green G-10 with a tension-wire clip that carries deeply in the pocket, tip-up and either left or right-handed. The CPMS30V laser cut blade is available PlainEdged and ground flat on both sides.
Made in Golden, Colorado U.S.A.
Please note, the "bronze" color that you see on the clip is intentional. The clips are actually heat treated (they are stronger and will perform better because of this). The heat treated wire clip is also more discreet in your pocket.
- Length Overall 6 15/16" (175mm)
- Blade Length 2 15/16" (74mm)
- Blade Steel CPM-S30V
- Length Closed 4 1/16" (103mm)
- Cutting Edge 2 5/8" (67mm)
- Weight 2.4oz (69g)
- Hole Diameter 1/2" (13mm)
- Blade Thickness 1/8" (3mm)
- Handle Material G-10
- Made in Golden, Colorado, USA
UPC Code: 716104007622
A hardened wear and corrosion resistant stainless steel developed in collaboration with Chris Reeve. It is known for its improved sharpness and toughness. This is a premium grade steel only used in high end knives. Composition: Carbon 1.45%, Chromium 14.00%, Vanadium 4.00%, Molybdenum 2.00%
This product is USA born and raised.
Includes a pocket clip for easy accessibility and a more secure carry.
Formed in a sheet under high pressure by combining fiberglass and an epoxy resin binder. These handles are lightweight and shaped to ensure a solid grip.