Subscribe to our Newsletter for exclusive offers!

Spyderco SpydeRench Multi-Tool 2-1/2" Blade, Pliers, Screwdriver Bits - SPT01PS

Part Number: SPT01PS
Manufacturer: Spyderco Knives

Discontinued

This product is no longer available

SPT01PS: SpydeRench
Spyderco


Spyderco describes this item as follows:

We are proud to reintroduce the T01 SpydeRench, it is truly a revolutionary addition to the multi-tool industry. The T01 SpydeRench includes a real Spyderco knife with a locking full-sized, one-hand open/close knife blade and pocket clip, plus much more. Designed by an aerospace engineer in conjunction with Spyderco’s research and development department, the T01 is made of investment-cast 17-4ph corrosion resistant stainless steel and features an adjustable crescent wrench with an opening capacity of 9/16”. On the opposite end, a 2-setting slip joint plier fits comfortably in the hand that has been contour casted, no pinched fingers. A set of four screwdriver bits tuck deftly inside, including: a #2 and #3 Phillips-head as well as a #1 and #2 flat-head. The SpydeRench also accepts any standard 1/4" sized bit from your hardware store, including Allen and Torx®.

The tool also features a diamond-coated file featuring a concave, convex and flat sharpening surface with a small Phillips head on one side and a hole starter on the other end. A unique pivot pin allows the tool to rotate into an extended position that locks open creating a full-sized easy to grip screwdriver and crescent wrench. By releasing the pivot, the screwdriver and knife portion of the tool can separate from the crescent wrench allowing both tools to be used independently and/or simultaneously. AUS-8 premium stainless steel was chosen for the full-sized locking knife blade.

This is a reissue of a product that was formally made in the USA. Along with the ByrdRench, which is made in China, they work better and are much better values. This SpydeRench includes a Nylon sheath.

Specifications

  • Length Overall: 6 7/8" (175mm)
  • Blade Length: 2 1/2" (64mm)
  • Length Closed: 4 9/16" (116mm)
  • Cutting Edge: 2 1/4" (57mm)
  • Hole Diameter: 15/32" (12mm)
  • Blade Thickness: 5/64" (2.25mm)
  • Blade Steel: AUS-8
  • Weight: 7.8 oz (222g)
  • Handle Material: Stainless Steel
  • Made in Taiwan

Pocket carry - a nylon case is also included

Closing the knife one handed

Opening the slip-joint pliers one handed

Rotating the two handles into the open and locked position

Removing the diamond file / small Phillips screw driver / hole starter

Removing the 1/4' bits

Included bits and diamond file / small Phillips / hole starter
Inserting the bits, they are held in place by a magnet

Using the screw driver

Pressing the release to close it

Aligning the pivot to take the handles apart

Taking the handles apart

Use each handle to tighten nuts and bolts from each side

The knife can used independently as well

Closing the knife one handed

© 1995-2014 by Howard Korn and KnifeCenter Inc. All rights reserved.

5201 Lad Land Dr, Fredericksburg, VA 22407 - 800.338.6799 (Phone Orders Welcome)