Chris Reeve Small Sebenza 31 Folding Knife 2.99" S35VN Stonewashed Blade, Sandblasted Titanium Handles with Natural Canvas Micarta Inlays - S31-1212
CRKS311200: Small Sebenza 31, Natural Canvas Micarta Inlays
Chris Reeve Knives
Sebenza means "work" in Zulu and these knives are intended to do just that. Built with handcrafted care at a production level, the Sebenza 31 has earned a worldwide reputation for rock-solid performance and a 'bank vault' feel. Offered with a CPM-S35VN hollow-ground blade at a 59-60HRC, the Sebenza 31's blade will retain a sharp edge with easy maintenance. The Sebenza 31 uses the Reeve Integral Lock, which is a lock bar integral to the back handle. Pre-bending at the end of the slot causes the spring to move to the base of the blade, thereby locking the blade open. It was a revolutionary design 31 years ago and through numerous refinements over the years, this is the best Sebenza created thus far.
Bridging the gap between hi-tech titanium and the organic feel of natural material is the Sebenza 31 with inlay. Available with a choice of woods, each piece fits exactly into one of three pockets machined into the handle — two on the front and one on the back. For those who prefer all hi-tech, they also offer inlays of black or natural canvas Micarta.
The fit of the inlay into the pocket is to extremely tight tolerance and the sections are retained with VHB (very high bonding) double-sided tape. The inlays give a contoured feel to the handle and are as attractive as they are functional. A polished S35VN blade and satin finish titanium handles enhance the wood inlay Sebenza 31 with wood, tumbled blade and sandblasted handle complete those with Micarta. A gold or silver thumb lug, lanyard tie, and spacer are chosen to coordinate with the color of the inlay.
- Reeve Integral Lock with Ceramic Ball Interface
- CPM-S35VN Stonewashed Drop Point Blade
- 6Al4V Sandblasted Titanium Handles
- Off-Set Clip Design
Sebenza 31 Upgrades
- Ceramic Ball Interface on the Lock Face
- Angled Pocket Clip Design
- Improved Lockbar Relief Cut
- Redesigned Single-Piece Inlays
- Blade Length: 2.99" (76.17 mm)
- Closed Length: 3.98" (101.09 mm)
- Overall Length: 6.98" (177.29 mm)
- Blade Material: CPM-S35VN Stainless Steel
- Blade Thickness: 0.120" (3.04 mm)
- Blade Hardness: 59-60HRC
- Blade Style: Drop Point
- Blade Grind: Hollow
- Blade Finish: Stonewash
- Handle Material: Sandblasted 6Al4V Titanium with Natural Canvas Micarta Inlays
- Handle Scale Thickness: 0.13" (3.30 mm)
- Locking Mechanism: Frame Lock
- Pivot Assembly: Washers
- Pocket Clip: 6Al4V Titanium (Tip-Up, Right Carry)
- Weight: 3.0 oz. (133 g)
- Designer: Chris Reeve
- Made in the USA
Semi-Custom or Mid-Tech knives are knives produced by a process in which the designer has more direct--but not complete--involvement; parts of these knives may still have been made by others.
Developed by Chris Reeve, it functions like a liner lock but the lock is comprised of one of the handle scales. It's an extremely strong and easy to manipulate lock.
Includes a pocket clip for easy accessibility and a more secure carry.
A tougher steel than S30V, it retains the excellent corrosive properties and ability to take an edge, but improves on the ability to hold that edge.
A nonferrous metal, it's prized for its high strength to weight ratio and is often used on higher end knives.
This product is USA born and raised.
$79.99 On Sale: $39.95
$69.99 On Sale: $39.95
$59.99 On Sale: $24.95
$99.99 On Sale: $55.95
$49.99 On Sale: $17.95