Rick Hinderer Knives Bronze Anodized Titanium Pivot Screw for XM-18 3" Model - 1203-2
RHK12032: XM-18 3" Model Titanium Pivot Screw, Bronze
Rick Hinderer Knives
These Titanium Pivot Screws are a direct replacement for the stock stainless steel model found on the 3" XM-18. They are available in a Blue or Bronze Anodized finish. The 3" XM-18 has a specific size pivot screw, the XM-18 3.5" and XM-24 use the same screw. Please make sure to order the right size screw for your knife, you can find the Bronze 3.5" XM-18/XM-24 pivot screw here.
- Please use great care when installing the anodized Ti pivot screws, if your screw driver slips it will more than likely scratch the anodized finish. The Hinderer Armorer's Tool has a precise fit screw driver blade to help eliminate any movement inside the slot that can damage the finish. If using a standard screw driver, we suggest putting masking tape on the tip to prevent marring of the finish. If you do damage the finish inside the slot you can use 360-600 grit sandpaper to sand the slot uniformly for a 2-tone finish. We are not responsible for any finish scratches during installation.