Rick Hinderer Knives Black Nitride Coated Stainless Steel Pivot Screw for XM-24 and XM-18 3.5" Model - K2152003NC


No Reviews, Be the first to review this item!
Part #: RHKK2152003NC | Hinderer Knives
Earn 150 knifeREWARDS Points!
RHK2152003NC: XM-24 and XM-18 3.5" Model Black Nitride Pivot Screw, Stainless Steel
Rick Hinderer Knives
These Pivot Screws are a direct replacement for the stock stainless steel model found on the 3.5" XM-18 and XM-24. They are also available in a Blue or Bronze Anodized finish. The 3" XM-18 has a specific size pivot screw, the XM-18 3.5" and XM-24 use the same screw. Please make sure to order the right size screw for your knife.
  • Please use great care when installing the pivot screws, if your screw driver slips it will more than likely scratch the anodized finish. The Hinderer Armorer's Tool has a precise fit screw driver blade to help eliminate any movement inside the slot that can damage the finish. If using a standard screw driver, we suggest putting masking tape on the tip to prevent marring of the finish. If you do damage the finish inside the slot you can use 360-600 grit sandpaper to sand the slot uniformly for a 2-tone finish. We are not responsible for any finish scratches during installation.
Titanium Handles
Titanium Handles A nonferrous metal, it's prized for its high strength to weight ratio and is often used on higher end knives.
Made in USA
Made in USA This product is USA born and raised.
This item has not yet been reviewed, be the first to review this item!


Subscribe to our Newsletter for exclusive offers!