Sentry Solutions Marine Tuf-Cloth CDLP Cleaner, Dry-Lubricant, Protectant 12" x 12" Cloth, Pouch (91020)

Description

SY1020: Marine Tuf-Cloth

Sentry Solutions

Cleans, prevents rust and lubricates without oils or silicones.

The lint-free replacement for oil and silicone rags. Non-toxic dry film corrosion inhibitors and lubricants provides a fast-drying, water-displacing micro-bonding crystal barrier against rust, friction and wear. For use in or on saltwater, long term storage or extreme conditions.

How It Works

Wiping with Marine Tuf-Cloth gives you cleaning, rust protection and lubrication. Pure mineral spirits is the fast drying carrier for the active ingredients, so Marine Tuf-Cloth cleans as it transfers the lubricants and protectants to all surfaces of your gear for 100% protection. It evaporates, and Sentrys proprietary ingredients bond to the surface; this bonding assures long-lasting effectiveness. Marine Tuf-Cloth s waterproof protection will not wash off or thicken in the cold (even down to -40°F/-40°C). It is dry to the touch so will not attract dirt like oil-based products, nor does it leave a slippery film like silicone. It is safe to use on wood and most plastics. Based on the original Tuf-Cloth formula with additional oil-free corrosion inhibitors not found in Tuf-Cloth, to enhance protection in extreme conditions and saltwater.

Marine Tuf-Cloth is user-adjustable; either by drying in air or adding pure mineral spirits. A wetter cloth applies a thicker shield of protection that dries more slowly. The excess can be buffed off after it is dry without compromising performance. Use Marine Tuf-Cloth to protect equipment, firearms, boat parts, knives, wood and all metal components. It maintains its effectiveness even when it is wet with water, and it will not harm most plastics.

Direction For Use

If surfaces to be protected are very dirty, grimy or oily, best performance will be achieved if the surface is cleaned before using Marine Tuf-Cloth. This helps bonding of the active ingredients and prevents contamination of your Tuf-Cloth.

Clean surfaces well.

Rub surfaces firmly with Marine Tuf-Cloth.

Drying time depends on thickness of coating/dampness of cloth. If cloth dries out add Tuf-Cloth or pure odorless mineral spirits (not turpentine) to restore its original feel. If item is exposed to saltwater: rinse with fresh water, dry and re-wipe with Marine Tuf-Cloth. Return cloth to its special vapor-barrier pouch and seal tightly for longer life.

Use frequently if item is exposed to saltwater, wear or stored outside.

For hard-to-reach areas use with Sentrys Solutions Award Winning Tuf-Cloth.

Contains mineral spirits. Wash hands after using. Keep away from children.