Utica Catskill Stockman 3-7/8" Jigged Bone Handles - 11-32579BB


MSRP* : $93.25 | You Save* : $45.30 (49%)
Part #: UT32579BB | Utica Knives
Earn 480 knifeREWARDS Points!
UT32579BB: Catskill Series | 3-7/8” Stockman
Utica Cutlery Company | Makers of Kutmaster Knives & Tools

Mirror polished, taper ground, 1095 high carbon steel blades are featured on our line of Catskill pocket cutlery. Rich hand polished brown tones highlight this fine line of jigged bone knives. Bolsters are dropped out of solid nickel silver sheets and tempered to exacting hardness.
  • 11-32579BB
  • 3-7/8” Stockman
  • Made in USA

UPC Code: 076771325789

1095 Carbon Steel
1095 Carbon Steel An excellent hard use steel, 1095 is a primary choice for camping and larger fixed blade knives for its extreme toughness and ability to hold an edge. Corrosion resistance is very limited with this steel (it will rust) and most blades come with a coating to prevent premature rusting.
Made in USA
Made in USA This product is USA born and raised.
Bone Handles
Bone Handles One of the most common natural materials used in knife making, bone handles are usually textured to provide grip and can be dyed almost any color.
Utica Catskill Stockman 3-7/8" Jigged Bone Handlesrated 4.000 stars out of 5 (11 reviews)
4.0 out of 5 stars
5 star
4 star
3 star
2 star
1 star
Utica Catskill Stockman 3-7/8" Jigged Bone Handles
rated 4 stars out of 5
Henry S
Vermont Sheep farm
Jul 20, 2016
Pros: Blade Sharpness, Blade Material, Handle Feel, Overall Quality
Cons: Ease of Opening, None
A solid pleasing knife with High carbon steel
I have been carrying various makes of a stockman knife for 40 years. This one is very good. I have had it for 10+ days and it arrived sharp albeit with blade taper that stays a bit thick until the last 1/32 of an inch where it bevels to a sharp edge. I was eliminating thistles from my pasture and did some cutting underground. The blade did well although it did not slide through the 3/4" thistle stem. I put a honed edge back on that blade and the steel was hard, took a good edge and did not form a wire edge.Reading complaints from a few reviewers about lose blades I requested Knife Center to inspect mine before shipping for sharpness and blade tightness. They did and shipped a good knife. The blade steel takes and holds a better than my stainless Schrade Uncle Henry. I do have one complaint. The knife was over buffed so as to make the thumb nail slots too rounded to easily open any of them. I made the slots a little crisper with a small beveled grinding bit in my drill. Not visable and they work great now.
Utica Catskill Stockman 3-7/8" Jigged Bone Handles
rated 1 stars out of 5
Neil C
Overland Park,KS
Nov 09, 2012
Pros: Handle Feel, Weight, Handle Material
Cons: Overall Quality, Blade Sharpness, None
The knife blades all had side to side movement and the edge of the blade was sharpened very poorly. It was all rough and jagged. Would have had to be resharpened immediately. I called customer service and they were very helpful in getting me a replacement knife secured, but it also had the side to side looseness. David in Customer Service alertmed me to the fact before shipment and we switched and ordered a Boker Stockman Knife for a little more money.I appreciate the fact he took the time to look at the knife and call me about it. I will wait and see how the new knife is. Thank You David!
Utica Catskill Stockman 3-7/8" Jigged Bone Handles
rated 2 stars out of 5
Little Rock,AR
Jul 02, 2012
Pros: None
Cons: Ease of Opening, Overall Quality, Blade Sharpness
Got a lemon today!
Bought to use as a pocket knife. There is nothing great about the product I received. One nail groove for opening is slick and rounded, sheepsfoot groove is partially inside handle and the third blade is loose when open. All blades are jagged and dull. I did not expect much from a cheap knife but I got less than that. Glad some of you got a better deal!
Read all 11 Reviews »


Subscribe to our Newsletter for exclusive offers!