DPx Gear HEST II Milspec Fixed 3.15" Stonewash Niolox Blade, Black G10 Handles, Cordura Sheath - DPHSX008
RPDPHSX008: HEST II Milspec
The DPx Gear Hostile Environment Survival Tool (HEST) II is a short run, high endversion of the DPX HEST Original. The HEST II is made with German Niolox steel which delivers a harder, more granular cutting edge without the chipping or problems normally associated with very hard tool steels. The scales on the HEST II are thick providing more storage area and a meatier grip
Designed by adventurer Robert Young Pelton and handmade by LionSTEEL in Northern Italy, the HEST II is an upgraded version of the knife that changed the way adventurers think about brutal-use knives.
The 3.15" (80mm) blade of the HEST II is made of German Niolox steel with a 61 Rockwell hardness.
Because the knife is tool steel, and not stainless steel, it is easier to sharpen but may oxidize if not properly cared for. Rust only affects the appearance of the knife and not the performance. Like all DPx Gear knives, we ask that you use a whetstone or diamond sharpener to dress the edge, and NEVER use a motorized grinder.
The blade is 0.187" (4.8mm) thick and features three sizes of wire strippers and a pry notch. There's a hex driver at the hilt and a wire breaker at the base of the blade. We removed a lashing point in the pommel because we found it unnecessary, and we changed the pry bar angle to better fit the size of the knife.
The HEST II has a hollow handle designed for storing survival materials like fire starter or water-purification tablets. The scales are attached with two slotted/Allen screws.
The HEST II Milspec is a take-to-the-fight, low-profile duty knife. The handle is American G10 scales and features a stonewashed German Niolox steel blade with 61 HRC. The Milspec weighs 4.85 oz. and comes with a black Cordura sheath with a sleeve for a sharpening rod or fire starter.
DPx Gear knives are guaranteed against manufacturer defects for the life of the purchaser. DPx Gear reserves the right to repair or replace a knife under warranty at DPx Gear's discretion.
- Overall length: 7.63"
- Blade length: 3.15"
- Blade thickness: 0.185"
- Stonewashed German Niolox steel blade with 61 HRC
- American-made black G10 handle scales
- Cordura sheath
- 304 stainless steel hybrid slotted/Allen screws
- 1/4" hex driver
- Hollow handle
- Unique wire stripper jimping and hard lashing points
- Thumb grip/bottle opener
- Weight: 4.85 oz.
- Made in Maniago, Northern Italy by LionSteel
UPC Code: 857171003176
Formed in a sheet under high pressure by combining fiberglass and an epoxy resin binder. These handles are lightweight and shaped to ensure a solid grip.
Ontario Randall RTAK II Fixed 10.25…
Ontario RAT-3 Utility Knife 3.75" P…
Ontario RAT-7 Survival Knife 7" Pla…
Fallkniven A1 Swedish Survival Knif…
Cold Steel Survival Edge 5" German …
Gil Hibben Alaskan Survival Knife 6…
Ontario RAT-5 Survival Knife 5.25" …
Ontario RAT-3 Utility Knife 3-3/4" …
Schrade SCHF42 Frontier Fixed 5.12"…
The Original Dog Tag 4 in 1 Surviva…
Schrade SCHF45 Full Tang Bowie Fixe…