Scorpion Knives Chris Caine Companion Survival Tool, 8" Satin Parang Style Blade, Canvas Micarta Handle - CCCK-1
SCCCCK1N: Chris Caine Companion Survival Tool
The Chris Caine® Companion Survival Knife, was designed by survival expert Chris Caine, based on his 15 years surviving in the British wilderness. This is "a survival tool for the serious survivalist."
The knife is the newest addition to the Chris Caine Survival Series and is designed as a mid-point between the larger Chris Caine® Survival Tool and smaller Chris Caine® Survival Knife.
When chopping with this tool your fingers are kept well away from the material you are hitting, thanks to the deep curve in the cutting edge, making it harder for you to trap your fingers. Not only this but on the back of the blade we have rounded off a section so when you are hitting this tool with another cutting of wood you are less likely to damage anything, and also makes it more useful for beating materials to obtain the fibers within.
The Chris Caine® Companion Survival Knife is hand made from start to finish, from profiling out the blades, hardening & tempering, assembly, grinding, right up to the final polish are all done in house.
The Chris Caine® Companion Survival Knife is handcrafted by Samuel Staniforth Limited, a company founded in 1864 in Sheffield, England and steeped in the tradition of producing the highest quality knives for professional users.
The blade laser cut from 5mm, CS80 Carbon Steel 51/53 Rockwell and has a full tang. Each tool is supplied sharp, and strong enough to fell a large tree, yet at just over one pound (453 g), it's light enough to be worn on your belt.
The blade has a convex grind to allow for a more durable edge, and ease of sharpening, not only will this tool split logs for the fire, it will also allow you to shave some fire sticks with ease, making it able to go from heavy work to fine intricate work without a problem.
Further back along the blade the spine has been left with a crisp square edge, to allow you to scrape wood in order to obtain a very fine fibrous layer, which will easily take a spark for starting your fire.
The handle is green canvas micarta with and has been designed with three main grips, meaning that power and control can be altered depending on the job in hand. The supplied nylon cordura sheath is also made to a high standard and fully articulated.
The range of Chris Caine knives come with a Lifetime Guarantee against faulty material or workmanship. In fact, when you receive your knife if it is anything less than you were expecting Scorpion promises to replace or refund it without question.
To maintain this knife at it's best, the blade should be dried after use and lightly oiled before being stored for any period of time.
- Blade Length: 8" (20 cm)
- Blade Steel: CS80 Carbon Steel, 51-53HRC
- Blade Thickness: 3/16" (5 mm)
- Overall Length: 13.75" (34 cm)
- Handle Material: Green Canvas Micarta
- Sheath Material: Nylon Cordura
- Weight: 16.1 oz. (453 g)
- Hand made in Sheffield, England
UPC Code: 420191
Durable, flexible, abrasion and mildew resistant, Nylon also is very strong
Micarta is a compressed layered composite sealed within a thermosetting plastic which creates a strong, attractive material that is impervious to water.
Cold Steel 97KMS Kukri Machete 13" …
Cold Steel 97GMS Gladius Machete 19…
Cold Steel 97MKM Magnum Kukri Mache…
KA-BAR 1249 Kukri Machete 11-1/2" B…
Condor Tool & Knife CTK410-14HCS Go…
Ontario Military Jungle Machete 18"…
Condor Tool & Knife CTK412-17HCS Pa…
Camillus Carnivore 12" Titanium Bon…
Ontario Sawback Machete 18" Blade
ESEE Knives Junglas Machete 10.38" …
Schrade Bolo Machete 14" 3Cr13 Stai…