Scorpion Knives Mel Parry "Signature" Hunter, 7.5" Satin Blade, Linen Micarta Handle - TACT-MPH
KA-BAR BK2 Becker Campanion Fixed 5…
Condor Tool & Knife CTK232-4.3HC Bu…
Cold Steel 20SPH Pendleton Lite Hun…
Condor Tool & Knife CTK240-8.5HC Hu…
Cold Steel Canadian Belt Knife w/4"…
Cold Steel 20RBC Roach Belly Fixed …
Benchmade 162 Bushcrafter Fixed 4.4…
Morakniv Mora of Sweden Red Clipper…
Condor Tool & Knife CTK242-8 Primit…
Morakniv Mora of Sweden Military Gr…
Cold Steel 20PC Finn Bear Fixed 4" …
SCTACTMPH: Parry Blade "Signature" Hunter
The Parry Blade is simply the ultimate combat/survival knife - the result of a unique collaboration between Mel Parry and Scorpion Knives.
Mel Parry's military service spans 32 years, 27 of which were spent with Special Forces and his operational experience formed an integral part of the design and development of this very special blade. Each knife is skillfully hand crafted by Scorpion Knives, making every knife truly extraordinary.
The Parry Blade is a pure combat survival knife designed and developed with efficiency and practicality in mind. A thoroughbred amongst knives, it was borne out of a clear understanding that a knife should be first and foremost a tool.
The knife is strong and heavy, made from 1/4" (6.4mm) thick high tensile stainless steel hardened to 57-58 RC and finished with a mirror polish. The main edge is bevel-ground for strength. The deep belly shape takes the weight forward giving the knife a powerful chopping stroke. The point is ground as a spear point and is strong enough for digging and prying.
Near the choil is a hollow-ground section that can be honed for razor sharpness for fine cutting and whittling, aided by the forward choke. On the top of the blade is a serrated edge for sawing through rope or webbing.
The checkered and contoured linen Micarta scales screwed to the full tang construction complete this exceptional knife.
The Parry Hunter comes complete with a black heavy duty Cordura sheath with a front pocket for holding a sharpening rod or other small object.
- Blade Length: 7.5" (19.1 cm)
- Blade Steel: x46Cr13 - 420 Stainless Steel, 57-58HRC
- Blade Thickness: 1/4" (6.4 mm)
- Overall Length: 12.5" (31.8 cm)
- Handle Material: Linen Micarta
- Sheath Material: Cordura
- Weight: 13.1 oz. (370 g)
- Made in Sheffield, England
UPC Code: 200026
Micarta is a compressed layered composite sealed within a thermosetting plastic which creates a strong, attractive material that is impervious to water.