Spyderco Caly 3 with 3" VG10 Steel Plain Edge Blade and G10 Handles - SP113GP
Buck 110 Folding Hunter 3-3/4" Blad…
$80.00On Sale: $44.95
Otter Mercator Solingen K55 Black C…
Spyderco C10PBK Endura4 Folding Kni…
Spyderco C28PBK2 Dragonfly 2 Foldin…
Cold Steel 20LT Tuff Lite Folding K…
Spyderco C66PBK3 Centofante 3 Foldi…
Spyderco C28GPFG Dragonfly 2.25" VG…
Spyderco Byrd Cara Cara 2 Folding K…
Spyderco C41GP5 Native 5 Folding Kn…
Spyderco C10FPGY Endura Flat Ground…
Cold Steel 27TDS Micro Recon 1 Spea…
The Calypso folder isn’t just one of Spyderco’s most popular folders, it inspired new Spyderco designs over the last ten years and converted many a knife buyer to the hard-use benefits of flat-ground, thick leaf-shaped blades. This is a workingman’s (or woman’s) folder and it’s founded on the design philosophy that the most comfortable and usable pocketknife is one that feels like a natural extension of your hand. The Caly3 has a VG-10 blade shaped like a leaf, thick at the tang, tapering to a robust tip. The sharpened edge is flat-ground and finely honed for precision and resistance-free cutting. There is a substantial finger choil where the handle meets the blade. At this spot the index finger settles naturally into the choil while the thumb settles directly above on the blade’s spine. The spine is textured with slip resistant jimping so the knife cannot slide forward or backward while cutting. The ergonomic handle is G-10 with a mid-positioned back lock. A low profile stainless wire clip holds the folder deeply in a pocket either tip-up.
Please note, the "bronze" color that you see on the clip is intentional. The clips are actually heat treated (they are stronger and will perform better because of this). The heat treated wire clip is also more discreet in your pocket.
- Length Overall: 7" (178 mm)
- Length Closed: 4 1/16" (103 mm)
- Hole Diameter: 15/32" (12 mm)
- Blade Length: 3" (76 mm)
- Cutting Edge: 2 5/8" (67 mm)
- Blade Thickness: 1/8" (3 mm)
- Blade Steel: VG-10
- Weight: 3 oz. (86 g)
- Handle Material: G-10
- Made in Japan
The lockback system has been used for many decades. It can usually be found on the knife spine and it provides a strong lockup that will wear well.
The exotic steel Capital of the World, Japan produces and innovates some of the best products, from pocket to kitchen knives and everything in between.
Formed in a sheet under high pressure by combining fiberglass and an epoxy resin binder. These handles are lightweight and shaped to ensure a solid grip.