Spyderco C118SBK Salt Saver Folding Knife 3-3/32" H-1 Serrated Blade, Black FRN Handles
Buck 110 Folding Hunter 3-3/4" Blad…
$80.00On Sale: $44.95
Otter Mercator Solingen K55 Black C…
Spyderco C10PBK Endura4 Folding Kni…
Spyderco C28PBK2 Dragonfly 2 Foldin…
Cold Steel 20LT Tuff Lite Folding K…
Spyderco C66PBK3 Centofante 3 Foldi…
Spyderco C28GPFG Dragonfly 2.25" VG…
Spyderco Byrd Cara Cara 2 Folding K…
Spyderco C41GP5 Native 5 Folding Kn…
Spyderco C10FPGY Endura Flat Ground…
Cold Steel 27TDS Micro Recon 1 Spea…
SP118SBK: C118SBK Saver Salt Black FRN
Yet another addition to Spyderco’s non-rusting Salt Series knife line, the C118 Saver Salt. The blades found on all Salt Series models are made with an alloy called H-1. H-1 is non-rusting premium-performance steel that’s raising interest in fishing, boating and diving circles. Why? Because it cuts for extended amounts of time before needing sharpening and it can’t rust. H-1's edge retention compares to other high carbon knife steels but its most distinguishable characteristic is that its nitrogen based as opposed to carbon based. Carbon is the instigator in creating rust when it reacts to chloride. It’s also what makes a blade hard and stay sharp. Nitrogen also makes steel hard and edge retentive but it doesn’t react with chloride, so it cannot rust. Saver Salt’s Sheepfoot blade is rounded at the tip for cutting around inflatable watercraft, flesh and in emergencies. No pointed tip means no accidental puncturing. The blade is flat-saber-ground for cutting excellence in and out of water. The oversized 14mm Spyderco Round Hole works for opening/ closing even if hands are gloved, cold or wet. Available in black or marine yellow, the fiberglass reinforced nylon resin the handle comes textured with a grip-sticking waffle pattern. An ambidextrous tip-up pocket clip also houses a lanyard hole for a variety of carry possibilities.
- Blade Length: 3-3/32" (79 mm)
- Cutting Edge: 2-5/8" (67 mm)
- Blade Thickness: 1/8" (3 mm)
- Overall Length: 7-3/16" (182 mm)
- Closed Length: 4-3/32" (104 mm)
- Hole Diameter: 9/16" (14 mm)
- Blade Steel: H-1
- Weight: 2.2 oz. (61 g)
- Handle Material: Black FRN
- Made in Seki-City, Japan
UPC Code: 716104008476
The lockback system has been used for many decades. It can usually be found on the knife spine and it provides a strong lockup that will wear well.
Includes a pocket clip for easy accessibility and a more secure carry.
The exotic steel Capital of the World, Japan produces and innovates some of the best products, from pocket to kitchen knives and everything in between.
A nylon polymer that is lightweight and extremely durable, Zytel can be shaped and textured to provide excellent grip.