Spyderco Byrd Wings Two Blades Plain and Serrated Edges G10 Handle - SPBY20GPS
Spyderco C122GP Tenacious Folding K…
Smith & Wesson Extreme Ops First Re…
Cold Steel 26SP Ti-Lite Folding Kni…
Ontario RAT Model 1 Folding Knife 3…
Kershaw 1830 Oso Sweet Assisted 3.1…
$39.99On Sale: $19.95
Spyderco C136GP Persistence Folding…
Boker Plus Urban Survival Pen Size …
TOPS/Buck CSAR-T Tactical Folding K…
Kershaw 1605CKT Clash Assisted 3" B…
$44.95On Sale: $29.95
Ontario RAT Model 2 Folding Knife 3…
Ask someone what comes to mind when they think of a multi-bladed pocketknife. There’s a likely chance the first thing that pops into their head is a traditional small bone-handled pocketknife like their grandfather used to carry. Those original multi-bladed pocket folders were handy for cutting packages or cardboard and floated deep in grandfather’s pocket clinking against his keys and loose change.
The byrd BY20 Wings is a multi-bladed pocketknife and that is where any similarity ends. It’s a medium sized folder offering the best of both worlds with two full-sized blades made of 8Cr13MoV stainless steel. The Sheepfoot-shaped blade is hollow-ground with 3- 3/8 inches (86mm) of serrated cutting edge. The Sheepfoot’s rounded tip has no point, suiting it well for puncture-free cutting. The second blade is a clip-point shape, also hollow-ground with 3-3/8 inches (86mm) of plain edge cutting surface for intricate and precise cutting. Combined together the blades pack over 6 inches of cutting power in a 5.4 ounce (152g) pocketknife. Each blade locks open independently with its own side-by-side LinerLock that is jimped (textured) along the locking lever for slip resistant lock engagement and disengagement.
G-10 laminate handle stays grippy in the hand and its’ pocket clip carries 4-ways: tip-up/tip-down and left- or right-handed. The clip’s end is rounded, lessening wear and tear on a pocket. Includes a nylon belt-carry sheath with snap closure.
- length overall 8" (203mm) blade length 3 3/8" (86mm) blade steel 8CR13MOV
length closed 4 3/4" (121mm) cutting edge 3" (76mm) weight 5.4oz (152g)
hole diameter 1/2" (13mm) blade thickness 1/8" (3mm) handle material G-10
Made in China
Considered a value steel, 8Cr13 steel provides adequate corrosion resistance but with slightly more carbon than AUS-8, it will sharpen up and hold an edge better.
Formed in a sheet under high pressure by combining fiberglass and an epoxy resin binder. These handles are lightweight and shaped to ensure a solid grip.