The T01 SpyderRench includes a real Spyderco knife with a locking full-sized, one hand open/close knife blade and pocket clip, plus much more. Designed by an aerospace engineer in conjunction with Spyderco’s research and development department, theSP T01 is made of investment-cast 17-4ph corrosion resistant stainless steel and features an adjustable wrench with an opening capacity of 9/16”. On the opposite end, a 2-setting slip joint pliers fits comfortably in the hand due to the contoured casting, no pinched fingers. A set of four screwdriver bits tuck neatly inside, including a #2 and #3 Phillips head as well as a #1 and #2 flat head. The user friendly SpydeRench also accepts any standard size bit from your hardware store, including Allen and Torx ® wrenches. In addition, the SPT01 includes an extended (long-length) bit with a flat head and Phillips head enabling access into tight places (ideal for “tunneled” electronic repairs). This extended bit doubles as a diamond-coated file featuring a concave, convex, and flat sharpening surface. A unique pivot pin allows the tool to rotate onto an extended position, which locks open creating a full-sized, easy to grip screwdriver and crescent wrench. By releasing the pivot, the screwdriver and knife portion of the tool can separate from the crescent wrench, allowing both tools to be used simultaneously. 440C premium stainless steel was chosen for the full-sized locking blade. Available in PlainEdge or SpyderEdge configuration, the blade has a cutting edge length of 2 1&Mac218;2” (64mm). Overall length of the SpydeRench is 4 1&Mac218;2” inches (114mm) and it weighs 7.92 ounces (200 grams).

Blade Steel: 440C
Blade Length: 2 1/2"
Overall Length: 4 1/2"
Weight: 7.82 oz (200g)
Hardness: RC: 58-60

Handles made of investment cast 17-4PH steel, heat treated and corrosion
resistant Opening cap. for crescent wrench is 9/16"
Tools included - slip joint pliers, crescent wrench, diamond coated
file, screwdriver bits (#2 and #3 Phillips, #2 and #1 flathead) double
ended extension drive bit included.
Pocket clip and lanyard hole
Tool can be taken apart to use crescent wrench and screwdrivers as
separate tools.
Photos are of a production prototype. Specs subject to change.
2 models - T01S (serrated blade) and T01P (plain edge blade).
Otherwise, same tools and configurations

Plain Edge

Combo Edge - SOON

Serrated Edge -


Return to the Spyderco Main Page

Copyright 2000 by The Center of the InterNet. All rights reserved.
All images and text are the property of The Center of the InterNet and may not be copied or used without the written permission of the Center of the InterNet. All prices subject the change without notice. Customers are responsible for compliance with their governmental regulations.
P.O. Box 600, 5111 Berwyn Rd STE. 110 College Park, MD 20740 U.S.A.
Orders: 1-800 338 6799 1-301 486 0901
If you experience any difficulties while using this page, please contact: support@thecenteroftheinternet.com