Fenix LR60R Rechargeable LED Search Flashlight, Black, 21,000 Max Lumens - FX-LR60R

Description

FELR60R: LR60R LED Search Flashlight, Black

Fenix Lights

The Fenix LR60R Search Flashlight is an advanced flashlight that is built for performance. Use its rotary switch to choose between 10 lighting modes - the floodlight for a wide field of view, the spotlight for long distances, or both for an extremely bright 21000 lumens of light. An OLED display shows you which mode you are on along with the remaining runtime. Quickly charge this flashlight’s replaceable battery pack in as little as an hour and a half via the USB Type-C port, or use the discharge function to charge your other devices. Included is a tripod socket and shoulder strap used for hands-free lighting. A powerful light built for the pros makes this flashlight the ultimate tool for exploring and search and rescue.

Mode Switching

With the light switched off, rotate the mechanical rotary switch clockwise to turn on the light and enter the Spotlight mode.

With the light switched off, rotate the mechanical rotary switch counterclockwise to turn on the light and enter the Floodlight mode.

Output Selection

With the light switched off, rotate the mechanical rotary switch clockwise to enter the Spotlight mode and select Eco→Low→Med→High→Turbo.

With the light switched off, rotate the mechanical rotary switch counterclockwise to enter the Floodlight mode and select Med→High→Turbo→SOS→Strobe.

Intelligent Brightness Downshifting Sensor

With the light switched off, switch the mechanical rotary switch in the order of Off→Eco→Off 3 times within 3 seconds. The OLED display will show "ON", and the light will blink twice in Eco mode, indicating that the sensor function is enabled. 

With the light switched off, switch the mechanical rotary switch in the order of Off→Eco→Off 3 times within 3 seconds. The OLED display will show “OFF”, and the light will blink eight times in Eco mode, indicating that the sensor function is disabled.

Intelligent Overheat Protection

The flashlight will accumulate a lot of heat when used at high output levels for extended periods. When the light reaches a temperature of 60°C/140°F or above, the light will automatically step down a few lumens to reduce the temperature. When the temperature drops below 60°C/140°F, the light will gradually recall the preset output level.

Power Bank Function

With the light switched off, open the anti-dust cover and plug the USB-A or USB-C socket of the charging cable into the flashlight, then connect the other socket of the charging cable to the digital device. When discharging, the OLED display will automatically light up to show the battery level and discharging status. Be sure to unplug the cable and close the anti-dust cover once discharging is completed.

Note:

Only Eco mode can be operated when charging. All modes can be operated when discharging and the flashlight will downshift to a lower brightness level based on the actual battery level. If the battery level is too low, the light will automatically stop discharging.