LOTAR Combat KHAOS Gen.2 REVENGER Custom MilSpec Elite PHANTOM Fixed Blade Knife 5.5" CPM-3V Matte Black DLC Double Edge Tanto, Milled IDF Ranger Green G10 Handles, Ranger Green Kydex Sheath - KA102OD
Description
LTRKA102OD: KHAOS Gen.2 REVENGER Custom MilSpec Elite Fixed Blade - PHANTOM
LOTAR Combat
LOTAR Combat proudly presents the KHAOS Gen.2 REVENGER. Only the worthy find peace in chaos.
REVENGER was born in the pressure of war and shaped in silence by Nir '300' and his fellow commanders from Israel's most elite tier one units. For twenty-five months of the Swords of Iron operation, this blade was refined through high-density urban warfare, harsh climates, and the unforgiving demands of those who lead from the front. Their details remain unspoken. Their legacy is embedded in every line of this weapon.
Custom built from CPM-3V Super-Steel, the most indestructible combat steel known to man, REVENGER delivers extreme impact resistance, brutal toughness, and a field life that survives every terrain and every season. CPM-3V maintains structural integrity where other steels fracture. It holds its edge through pressure, fatigue, and prolonged combatives, making it a trusted companion in the harshest engagements.
Every component was rebuilt through multi-season field adaptation. The MilSpec bio-ergonomic handle features deeper indexing, expanded grip geometry, and enhanced retention designed to lock into the hand under sweat, mud, rain, and gloved conditions. Refined jimping points anchor the fingertips with instinctive traction during micro combat. The improved cryogenic heat treatment maximizes the internal strength of CPM-3V, creating a blade that absorbs punishment without compromise.
REVENGER introduces an advanced triple hollow Equilibrium Fuller. This balance system reduces fatigue, absorbs recoil, and disperses impact shock away from the hand. It improves directional speed and increases precision during angle transitions. The blade moves with the operator’s intent, not against it.
REVENGER stands as the newest evolution of the world's first and only MilSpec tactical fighting series. The only edged weapon on earth shaped by highly experienced urban warfighters and refined for those who operate in the shadows with purpose, faith, and aggression.
Own your REVENGER today. Command the chaos of tomorrow.
REVENGER is available in three trims, each created for a different type of warrior.
GHOST - MILSPEC black G10 scales with matching blackout Kydex. Zero signature. Pure stealth. Only three hundred are available to own.
PHANTOM - IDF Ranger Green G10 scales with matching Ranger Green Kydex. Field dominant. Multi-terrain concealment. Limited to one hundred units.
SHADOW - Elite carbon fiber scales with a matching carbon fiber sheath. The flagship of the series. Lightweight. Rigid. Fierce. Only one hundred units exist in the world.
Features
- CPM-3V combat steel engineered for extreme impact resistance and maximum toughness in real world warfare
- Multi stage and cryogenic heat treated to 59 to 61 HRC
- Flat ground double edged tanto blade with reinforced penetration tip for decisive thrusts and slashes
- Triple hollow Equilibrium Fuller for balanced weight, reduced drag, and enhanced shock dispersion
- Recurved ripsaw spine geometry for tearing power and reverse motion control
- Micro combat serrated swedge for negative angle cuts and secondary edge engagement
- Serrated combat edge engineered for webbing, rope, and emergency field tasks
- Blackout Matte DLC finish for signature reduction, optimum corrosion resistance, and MilSpec level surface protection
- MilSpec bio ergonomic grip scales designed for deep retention in sweat, mud, rain, and gloved operations
- Deeper indexing channels for instinctive hand placement and micro combat precision
- Enhanced jimping points along the spine and handle for maximum traction under pressure
- Intuitive ComFort Fit Loop for combat rotations, weapon retention, and controlled impact manipulation
- Reinforced strike point pommel for glass breaking and focused strikes
- Skeletonized internal frame for reduced weight and improved fatigue resistance
- Stainless steel hex hardware engineered for field durability and corrosion resistance
- Full tang beveled geometry for structural integrity and long-term comfort
- RapidDeployment Kydex sheath engineered for secure retention and silent draw
- LOTAR Combat IWB360 Clip for concealed carry with full rotational freedom
- Tek-Lok style combat belt clip for overt carry, belt mounting, and MOLLE compatible attachment
- Universal mount system compatible with tactical rigs, vests, carriers, and operational loadouts
Specifications
- Blade Length: 5.50" (140 mm)
- Handle Length: 4.50" (114 mm)
- Overall Length: 10.00" (254 mm)
- Blade Material: CPM-3V Premium Tool Steel
- Blade Thickness: 0.236" (6.0 mm)
- Blade Hardness: 59-61HRC
- Blade Style: Double Edge Tanto
- Blade Grind: Flat
- Blade Finish: Blackout Matte DLC
- Handle Material: Milled IDF Ranger Green G10
- Handle Thickness: 0.625" (15.0 mm)
- Sheath Material: Ranger Green Kydex
- Weight: 10.05 oz. (285 g)
- Weight with Sheath: 13.23 (375 g)
- Designer: Mike Lee Kanarek
- Made in Israel
Related Categories
LOTAR Combat, 3V Blade Steel, G10 Handle Material, Fixed Blade Knives, Fixed Blade Knives Combat Knives, Made in Israel, Mike Lee Kanarek
Badges
