Zero Tolerance 0470 Dmitry Sinkevich Flipper Knife 3.4" 20CV Two-Tone Blade, Titanium Handles with Carbon Fiber Insert


MSRP* : $325.00 | You Save* : $65.00 (20%)
Part #: ZT0470 | Zero Tolerance Knives
Earn 2,600 knifeREWARDS Points!
ZT0470: Model 0470 Folding Knife
Zero Tolerance Knives
This handsome design from ZT and Dmitry Sinkevich begs to take pride of place in your collection.

Not that the 0470 is a safe queen. Far from it. It's a highly practical, easy-to-EDC design that handles a wide range of tasks and looks good doing it.

The blade is CPM 20CV high-chromium stainless steel. This powdered metallurgy tool steel has a high volume of vanadium carbides for exceptional wear resistance and a truly long-lasting edge. The highest level of chromium of any high-vanadium steel gives it excellent corrosion resistance as well. The two-tone, satin-and-stonewashed blade finish looks handsome, while the KVT ball-bearing opening and a flipper make the knife fast and easy to open.

The 0470's handle is titanium with an eye-catching marbled carbon fiber insert. Instead of a formal "weave" as in standard carbon fiber sheets, for the "marbled" insert, the carbon fibers are dropped randomly onto the plate. Then resin is added to secure the fibers and produce a smooth surface. A titanium clip and a black anodized-aluminum backspacer complete the look of this refined pocket knife.
  • Flipper
  • KVT ball-bearing system
  • Hardened steel lockbar insert
  • Bent titanium clip
  • Blade Length: 3.4" (8.6 cm)
  • Closed Length: 4.40" (11.2 cm)
  • Overall Length: 7.8" (19.8 cm)
  • Blade Material: CPM 20CV Stainless Steel
  • Blade Thickness: 0.121" (3.07 mm)
  • Blade Style: Drop Point
  • Blade Finish: Two-Tone Satin/Stonewash
  • Handle Material: Titanium with Carbon Fiber Insert
  • Locking Mechanism: Frame Lock
  • Pivot Assembly: KVT Ball Bearing System
  • Pocket Clip: Tip-Up, Right Carry
  • Weight: 3.3 oz. (95 g)
  • Designer: Dmitry Sinkevich
  • Made in the USA
Titanium Handles
Titanium Handles A nonferrous metal, it's prized for its high strength to weight ratio and is often used on higher end knives.
Pocket Clip
Pocket Clip Includes a pocket clip for easy accessibility and a more secure carry.
Frame Lock
Frame Lock Developed by Chris Reeve, it functions like a liner lock but the lock is comprised of one of the handle scales. It's an extremely strong and easy to manipulate lock.
Made in USA
Made in USA This product is USA born and raised.
Zero Tolerance 0470 Dmitry Sinkevich Flipper Knife 3.4" 20CV Two-Tone Blade, Titanium Handles with Carbon Fiber Insertrated 5.000 stars out of 5 (1 review)
5.0 out of 5 stars
5 star
4 star
3 star
2 star
1 star
Zero Tolerance 0470 Dmitry Sinkevich Flipper Knife 3.4" 20CV Two-Tone Blade, Titanium Handles with Carbon Fiber Insert
rated 5 stars out of 5
Jul 01, 2019
Pros: Blade Sharpness, Handle Material, Overall Quality, Pocket Clip, Ease of Opening, Handle Feel, Weight, Lock Ease of Use, Blade Material
Cons: Lock Type, None
My new EDC after owning many high end knives.
How could I give it a poor rating? It's not perfect because inherent design of frame lock.Amazing materials and construction/craftsmanship. Great size and blade shape. Perfect blade thickness for medium and light duty. Great look without being over the top.Only negative I can say is if opening left handed, your thumb will probably put too much pressure on the frame lock for it to flip open all the way by itself. Unless you are consciously avoiding this. Sometimes it does it right handed too but much less often since your middle finger only slightly rests on the lock.Some people say they have issues with bearing washers but I haven't so far carrying daily in Afghanistan for 4 months. However I do maintain it by spraying water and blowing air in the pivot every now and then if some fruit juice gets in there by accident. Followed with a drop or two of knife oil.The frame lock works well- I haven't tested it strongly but it feels strong and I haven't had any slip or lockup. The tension feels perfect- definitely strong enough to stay closed but moves with the expected amount of effort.The blade has not even a hair of play because of the bearing washers. My benchmades are tight but if you feel very closely there is a tiny amount you can barely feel or else the pivot will be too tight. The bearing washers of the ZT fix that.


Subscribe to our Newsletter for exclusive offers!