Subscribe to our Newsletter for exclusive offers!

Spyderco C28GPFG Dragonfly 2.25" VG10 Plain Blade, Foliage Green G10 Handles

Customer Reviews 4.533 Read 30 reviewsWrite a Review
Part Number: SP28GPFG
Manufacturer: Spyderco Knives
Retail Price: $159.95
Our Price:
You Save: $63.98 (40%)
Calculate Shipping

Earn 960 knifeREWARDS Points!
SP28GPFG: Dragonfly

It seems like smaller knives get respect equivalent to their size, very little. Most people don’t look at a subcompact lightweight car and think “high-performance vehicle”. That estimation can change when it’s revealed that little clown-car disproportionately packs 350 horsepower and a high-speed racing package. Stature doesn’t always accurately represent ability and performance, as exampled in the Spyderco Dragonfly. Its cutting ability is unequal to its diminutive package and innocuous name. The small-knife–bigfeel, works through providently executed ergonomics and premium components like VG-10 blade steel, a foliage green G-10 handle. Shape also matters - the full flat-ground blade has a spine cusp providing the thumb a natural settling place, controlling the cutting edge. G-10 handle hits all the correct pressure points in the hand and has a purposeful flat shelf at the base where the pinkie finger rides as a leveraging point. Deep pocket wire clip.
  • Overall Length: 5.25" (140 mm)
  • Blade Length: 2.25" (57 mm)
  • Cutting Edge: 1.875" (48 mm)
  • Closed Length: 3.1875" (81 mm)
  • Steel: VG-10
  • Weight: 2 oz. (56 g)
  • Clip: Left/Right; Tip-up Carry
  • Handle Material: Foliage Green G-10
  • Made in Japan

UPC Code: 716104002665

The lockback system has been used for many decades. It can usually be found on the knife spine and it provides a strong lockup that will wear well.
Pocket Clip
Pocket Clip
Includes a pocket clip for easy accessibility and a more secure carry.
Made in Japan
Made in Japan
The exotic steel Capital of the World, Japan produces and innovates some of the best products, from pocket to kitchen knives and everything in between.
VG10 Stainless Steel
VG10 Stainless Steel
This Japanese super-steel is known for it's ease of sharpening, ability to take a super fine edge, and outstanding corrosion resistance making it one of the best bang-for-buck steels on the market.
G10 Handles
G10 Handles
Formed in a sheet under high pressure by combining fiberglass and an epoxy resin binder. These handles are lightweight and shaped to ensure a solid grip.
4.533 (30 reviews)
4.5 out of 5 stars
5 star
4 star
3 star
2 star
1 star
4 out of 5
Yoshitaka S
San Jose, CA
Mar 15, 2017
Pros: Blade Sharpness, Weight, None
Cons: Pocket Clip, Overall Quality, Ease of Opening
Well designed knife but...
it lacks in execution. The thumb hole was too sharp so I had to sand it down. Also, it was very tight that I had to adjust the screws to loosen it to open and close relatively easily. It's still little stiff. The tight and stiff pocket clip on G-10 material makes it very difficult to put it in and take out of thick jeans. I love the shape of the blade and how well it is centered.
5 out of 5
So Cal
Apr 06, 2016
Pros: Blade Sharpness, Handle Material, Handle Feel, Overall Quality, Pocket Clip, Ease of Opening, Weight, Lock Ease of Use, Blade Material
Cons: None
Awesome little but BIG edc knife
A gift from my wife. I already own the FRN model but have always admired the G10 model. I have used the FRN model for 18 months and I carried it every day. It may be small but it is a BIG cutter. I really like the VG10 steel but it can be a chore to sharpen it to the level I received it from the factory. I have been edc the G10 model for 3 months and it is worth every penny over the cost of the FRN model. The quality is superb, the lockup is vault like and the grip is excellent. The .08 ounces are minimal as the weight is still only 2 ounces. As usual Knife Center is awesome. I have over 2 dozen folders and all but 1 came from KC.
2 out of 5
Mar 22, 2016
Pros: Blade Sharpness, Blade Material, Lock Type, None
Cons: Overall Quality, Handle Feel, Pocket Clip, Lock Ease of Use, Weight, Ease of Opening
Disappointing quality control
After having salt 1 for a while, which is a bit bigger than dragonfly, but is a charm to use (still use it today, after a number of other options), I decided to go with this one, as the height of salt1 upsets your pocket a bit, and was expecting much of this guy. When it arrived, at first I saw that from top of hadle you can see that the scales aren't fitting next to blade the same. The right scale was next to blade, looking at it when opened, and the right one was half a milimeter away, so there was a gap. After thigtening the pivot screw, it became nearly impossible to open the knife, even though the left scale didn't get as close to blade as the right one, nevertheless. This got dragonfly out of the question for edc. Plus it would be hard to open it one handed due to the size, even if you have fairly small hands like I do, and the height of the knife is very close to salt 1 when sitting in pocket. And the pocket clip gets loose very quickly, had to tighten it a couple times in just 10 days of overall carry. Not to say only bad things, this knife is razor sharp out of factory, and can put edge back fairly quickly. If you are really into this little one, take the FRN version, as this one is to heavy for what it can give you + too much money for lousy quality control
Read all 30 Reviews »
Loading Reviews